|Folding Stand #992 shown with #913 2/3 size IPSC
target. Target sold separately.
||Detail of Target Mounting. Target hangs
loosly on stand to absorb shock. Angle is adjustable.
target at an angle to deflect fragments to the ground.
steel construction holds up to accidental bullet hits.
flat for easy transport.
|Detail of Folding Leg Hinge. Legs unfold
and Target Mounts without the use of tools.
||Size: Tall Stand Holds target mounting point at 53"
from ground. Folds to 63" long. Weight 20#
Holds target mounting point at 45" from ground. Folds to 53".
Remove Bolt from hole where it has been stored for
shipping. Place bolt thru hole in target and tighten Flange Nut so there is
approximately 5/16” gap between nut and target. Slide bolt into slot on
Target Stand with nut over back of bracket so that Target hangs angling down
and back. Adjust nut tightness to obtain desired angle. Target should hang
loosely so it can give when hit.
Leg bolts should be tightened, then backed off 1/8 turn
so that legs will fold but will not swing freely. Lock washer is to provide
tension to prevent legs from swinging. For permanent set up or heavy use,
tighten leg bolts all the way down.